This product is made of HDPE (high density polyethylene, which can be recycled), which makes this products highly resistant to impact. It has textile insert, 6-point harness, and a three depth adjustment system. The width can be easily adjusted by the Evolution™ wheels (WR extension in the product key) or the OneTouch™ strip (SR extension in the product key). The cotton sweatband is coated with a porous PU layer, which is pH neutral and dermatologically tested material. The helmet is available in variant with ventilation (extension V in product key) or without ventilation, in several colors. The helmet with ventilation is designed in such a way, so that the warm air get out through the openings and the cold air enters, which reduces the negative effects of UV radiation and lowers the inside temperature by 2-3 degrees. The helmet without ventilation fulfills the requirements of EN 50365, class 0 - electrically insulating helmets for use on low voltage installations. This means that this helmet is electrically isolated and suitable for working under low voltage conditions or close to low voltage objects (not over 1000 V AC or 1500 V DC - two triangle mark). Also, this helmet (without ventilation) will protect the user from short-term, unintentional contact with the electric arc (440 V AC). Helmet without ventilation provides a certain protection against spraying of molten metal. It is possible to mount accessories on the EVO 3® helmet (visor, visor holder and earmuffs) from the Surefit™ EVO collection, using universal adapters which are placed on both sides, as well as EVOSpec® protective glasses. It can be delivered with the lamp adapter, as well as in the variant with a ribbon around the chin.